Ch. 3 - The "Edit" Options; Undo (Cj-Z); Cut (Ll-X); Copy (Ll-C) - Applied Engineering AUDIO ANIMATOR User Manual

CHAPTER THREE
The "Edit" Options
The Edit options of the sequencer are only available when you
have a segment selected in the edit window.
Undo
(d-Z)
After you've made a change to the file, you can select Undo
to cancel the most recent modification. The Undo command
will be followed by the most recent option you've selected,
for example, Undo Paste or Undo Delete. If Undo isn't an
option for the change you've made, the Undo command will
be dimmed.
Cut
(d-X)
After you've selected a portion of a track, choose Cut to
remove the selection from the screen and copy it to the
GS
clipboard. You can then paste it to another location in the
same file or to a different sequencer file .
The selection will remain in the clipboard until you switch to
the Digitizer, until something else is pasted in to take its
place, or until you quit the program.
Copy
(d-C)
Choosing Copy when a portion of the file is selected will
copy the selection to the clipboard without removing the
selection from the screen.
Paste
(d-V)
Selecting Paste copies the current contents of the clipboard
into the file at the selection bar position.
If a section of the file is selected when you choose Paste, the
clipboard contents will replace the selection and the
selection will be deleted.
Ch. 3 - The "Edit" Options 71