Applied Engineering AUDIO ANIMATOR User Manual page 104

Connecting to PHONES
If your speaker wires (or wires from your amplifier) end in
the 1/8" plugs (often called RCA plugs), you'll need the Stereo
Playback Y-Adapter. It adapts 1/8" stereo mini plug to the
Audio Animator's 1/4" Phones plug. (Radio Shack Cat. No.
274-371-right angle model or 274-367-straight model.)
From Speaker or
Amplifier Phono Plugs
Left and Right
ToM PHONES
RS Cat. No. 274-308
Adapts Two Phono (RCA) Plugs to
114" Stereo Jack
If your speaker wires end in stripped ends, you can get two
"Mini Phono Plug to Stripped Ends" and attach it to a
connector with "two 1/8" mono plugs to 1/4" stereo jack." (2
cables--RS Cat. No. 42-2434 and 1 adapter--RS Cat. No. 274-
307.)
From
Speaker
Wires
Left
and RIght
RS Cat. No. 42-2434
1/8" Mono Plug to
Stripped Ends
ToM PHONES
RS Cat. No. 274-307
Adapts two 1/8" Mono Plugs to
1/4" Stereo Jack
If you have a setup different from the ones mentioned, talk to
your local Radio Shack person or stereo/electrical supplies
person for the correct cables and adapters.
CD, VCR, TV, Turntable and Amplifier Connections
Use the Audio Animator line input connectors, located on
the back side of the box, for recording to the digitizer from
your CD player, VCR, Turntable, tape deck, etc.
Record your creations
to
your tape deck or
VCR
by
connecting to the output connectors.
The line connectors require phono plugs. Many cables end in
phono plugs and will need no adapters.
<;0
App. C - Adapters