Cm-850 Mls Control/Display Unit Leading Particulars - Honeywell SPZ-8000 Maintenance Manual

Dimensions (maximum):
Length (from back of
bezel) ...................... 5.90 in. (149.9 mm)
Width ...........................................
$.:; ~;.
(60.3 mm)
Height .......................................... .
. (66.7 mm)
Weight (maximum) ........................................ 1.251b. (567g)
Power Requirements ......................... 18t032Vdc, 4VA maximum
Lighting
...... .. .. ..... ......... ..... .. 5 V acldc or 28 V dc; Brightness
is 0.25 to 0.75 FT-L at 5077 of
maximum voltage
Current =
10 mA maximum
Display Type .............................
Dichroic
LCD,
white characters
on black background
Mating Connector ......................................... MS3126F20-41SW
Mounting ..................................... Panel mount, self clamping
CM-850 MLS
Control/Display Unit
Leading Particulars
Table 14-3
The CM-850 MLS Control Display Unit (CDU) is the main tuning source for
the MLS system. The CDU
provides access to four separate functions;
channel number/ident (CH), glidepath (GP, azimuth (AZ), and black
azimuth
(BK). Each function has an annunciator, an arrow cursor and a
pushbutton associated with it. Depressing any one of the pushbuttons
selects that function for programming, and turns on the associated arrow
cursor. The pushbuttons are all labeled as to their function. The
following paragraphs describe the operation of each control.
14. B. (1) Rotary MODE Switch
Rotating the MODE switch
(clockwise or counterclockwise) to the
next position will cause the mode to change. If
in
AUTO mode, the
mode will change to MAN mode. If in MAN mode, the mode will change
to AUTO mode.
22-14-00
Page 198.197
Apr 15/93
Use or disclosure of information on this page is subject to the restrictions on the title page of this document.