Honeywell SPZ-8000 Maintenance Manual page 432

Digital automatic flight control system for gulfstream iv
Hide thumbs Also See for SPZ-8000:
Table of Contents

Advertisement

2. D.
(6)
(e) Range Ring - A range circle is displayed to aid in determining
the position of the active flight plan parameters. The circle
corresponds to half the selected range on the weather radar
controller. The circle is labeled on both sides with the half-
range data.
(f) Active F1ight Plan Waypoints (WAYPT) - The active flight plan
can be displayed in the plan mode whenever the WAYPT selection
has been made on the display controller (Figure 221). The
pilot is given the choice of displaying the waypoints with or
without ID labels. The flight plan waypoints are displayed in
white with a white connecting path line (DTRK). The TO
waypoint is always displayed in magenta (consistent with the
FMS CDU) for a visual indication of the active flight plan leg.
A maximum of 16 waypoints can be displayed on the MAP at any
time.
(g) Navaids - The FMS
outputs
data
for the 10 (max) closest navaids
to present position. These are displayed, when selected, in
yellow using the standard vortac symbol (Figure 221). Navaids
can be displayed with or without IDs as selected through the
display controller.
(h) Airports - The FMS outputs data for the nine (max) closest
airports to present position. These are displayed, when
selected, in cyan using a circular symbol (Figure 221).
Airports can be displayed with or without IDs as selected
through the display controller.
(i) Waypoint Annunciations - Track changes, both lateral and
vertical, are given at the upper right-hand side of the plan
range ring (Figure 221).
Directly below these annunciations is
the track offset annunciation. The annunciations are displayed
in white and labeled as follows:
VERT ALRT
- Vertical Track Change
TRK CHG
-
Lateral Track Change
OFFSET
- Track Offset Mode
These annunciations are active as previously discussed in
paragraph 2.D.(2)(n).
(j) Joystick - Joystick operation is as previously discussed in
paragraph 2.D.(2)(0). The one difference is that the joystick
cursor remains fixed in the center of the display and the
active flight plan is moved about this point with the joystick.
22-14-00
Page 258
Aug 15/91
Use or disclosure
of information
on this page is subjecf
to the restrictions
on the title page of this documenf.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents