Stored Flight Plan Data - Honeywell SPZ-8000 Maintenance Manual

Honeywell !!!$!!~.c'
The following are calculated and/or displayed for the active
flight plan under the WHAT-IF conditions:
. Cruise altitude and ceiling altitude
Step
increment
. ETE to destination for active and WHAT-IF flight plans
Fuel required to destination for active and WHAT-IF flight
plans
Optimum altitude
Step
altitude (based on initialized step altitude increment)
. Command speed
ETE and ETA to step climb point
. Command EPR setting
.
DTG
for step point
. Range to
reserve
. Time to reserve
. Current fuel remaining
. Cruise pages under WHAT-IF conditions
4. C. (1) (k) Stored Flight Plan Data
Performance data can be calculated for a stored flight plan.
The performance initialization inputs may be changed to reflect
the expected conditions for the flight. The default
initialization values are the currently active values except
for fuel weight. The following is calculated and/or displayed
for the stored flight plan:
. Cruise altitude and ceiling altitude
Step
increment
. Time to destination
Fuel required to destination
22-14-00
Page 298.171
Aug 15/91
Use or
disclosure of Information on this page is subject to the restrictions on the title page of this document.