Honeywell SPZ-8000 Maintenance Manual page 326

Dimensions (maximum):
Length ........................................ 14.58 in. (370.33 mm)
Width .. ........ ... .... .. ... ... .. ....... . ..... .. .
2.25 in. (57.15 mm)
Height . ..... ... .. .. ... .. .. ........ .... .. .. ... ..
7.60
in. (193.04 mm)
Weight (maximum). . ..... ... .. . ....... .. ...... . ... .. ... ..
6.5 lb (2.95 kg)
Power Requirements.................................... 28 V dc, 40 Wmax
Frequency ... .. .... ..... .. .. .. ...... ... ..... . . .. ... .....
10.2 to 13.6 kHz
Mating Connector..................... Cannon Part No. DPXBMA-57-33S-OO01
Mounting.......................... ................................. Tray
OZ-800 Receiver Processor Unit
Leading Particulars
Table 11-1
The 0Z-800 RPU receives and processes data from the ground-based OMEGA/VLF
stations to provide updated position and velocity information to the FMS
navigation computer. The RPU receives initialization data from the FMS. The
RPU receives the amplified antenna signals and converts them into position
information. The RPU also supplies the antenna with *12 volts dc power.
The RPU receives the following signals over an ARINC 429 low-speed bus:
Label
Parameter Name
210
True Airspeed
(TAS)
314
Heading
041, 042 Initialization of Set Position
125
Greenwich Mean Time (GMT)
260
Date
272 Station Deselect
22-14-00
Page 198.161
Apr 15/93
Use or disclosure of information on this page is subject to the restrictions on the title page of this document.