Flt Ref Mode - Honeywell SPZ-8000 Maintenance Manual

Digital automatic flight control system for gulfstream iv

Hide thumbs Also See for SPZ-8000:

Table of Contents

for display.

the box between

(and 3 if applicable)

of the source.

and copilot's power-up defaults are as follows:

The FGC power-up selection is dependent on which FGC is powered

up first. The selection will be the same on both pilot's DCS.

All of the possible sources are shown in

must be wired in the aircraft to get the

on the SENSOR menu.

(8) FLT REF Mode

The FLT REF mode function is comprised of the

reference data (Figure 6-16):

. Vspeed Reference Bugs

- Vl, VR, V2, VFS, VSE, VREF

Figure 6-15. The DC

IRS 3 selection shown

following settable

Performance System Auto Vspeed Selection Mode

Radio Altitude Set

. AOA Reference Bug

(a) FLT REF Function Key Selection - Selection of the FLT REFmode

causes the function key to be annunciated along with the FLT

REF menu to be displayed on the DC CRT (Figure 6-16). The FLT

REF mode menu is used to set and select, for display, important

reference data on the PFD. A FLT REF function key selection

has no effect on any of the display formats.

FLT REF data

selections are made using the menu driven line select keys and

DC parameter set knob.

of information

on this page

totherestrictions

on the title page of this document,

Show Quick Links

Table of Contents