7 Starting up the Application
7.3 Using the application with STEP 7 / WinCC V13
No.
5.
In the "Load results" dialog box, activate the "Start all" action and click on the "Finish" button
to terminate loading.
7.3
Using the application with STEP 7 / WinCC V13
Unzip the file "61450284_SITOP_Appl_S7-300_400_CODE_v11.zip" into a
separate directory. The project is then automatically unzipped with all respective
subdirectories.
In STEP 7 / WinCC V13 you open the project established with STEP 7 / WinCC
V12 SP1 Upd4.
The message shown in
with "Yes" to upgrade the project to V13.
Figure 7-1
Monitoring of 24 V load circuits
Entry-ID: 61450284,
V1.1,
Figure 7-1
05/2014
Action
appears automatically. Confirm the message
54