Table 6-3 (continued). Internet connection parameters.
Parameter
Release button
Renew button
When the WAN port is a Dynamic IP connection, the Release and Renew
buttons will release the Pure Networking Broadband Router's WAN IP
address. Renew will get another IP address from the DHCP server. If the
WAN port uses PPPoE, Release will disconnect the PPP session, and
Renew will initialize another PPP session.
6.3 Device Status
View the Pure Networking Broadband Router's current configuration settings. The
Device Status screen displays the configuration settings you've configured in
Chapters 4 and 5. See Figure 6-3.
Press this button to disconnect from the Internet.
Press this button to reconnect to the Internet.
NOTE
Figure 6-3. Device Status screen.
CHAPTER 6: Status Information
Description
95