Table of Contents
Advertisement
Parameter
Apply button
Cancel button
Click on the Apply button at the bottom of the screen to save the configurations.
You can now configure other advanced sections or start using the router (with the
advanced settings in place).
5.2.8 L2TP
Select L2TP if your ISP requires the L2TP protocol for connecting to the Internet.
Your ISP should provide all the information required in this section. See Figure
5-12.
Table 5-10 describes the router's L2TP settings.
Table 5-9 (continued). DDNS parameters.
Default
—
—
Figure 5-12. L2TP screen.
CHAPTER 5: General Setup
Description
Click on this button to save your
changes.
Click on this button to cancel your
changes.
53
Advertisement
Table of Contents
