Table of Contents
Advertisement
Parameter
Set Time Zone
Enable Daylight Savings
Start Daylight Savings Time Use the drop-down menu to select the day you want
End Daylight Savings Time Use the drop-down menu to select the day you want
Next button
Click on the Next button to proceed to Broadband Type.
4.3 Broadband Type
In this screen, you'll select one of four types of connections that you'll use to
connect your Pure Networking Broadband Router's WAN port to your ISP (see
Figure 4-2).
Different Internet Service Providers (ISPs) require different methods of
connecting to the Internet. Check with your ISP for the type of
connection it requires.
Table 4-1. Time Zone screen parameters.
Use the drop-down menu to select the time zone of
the country you are currently in. The router will set its
time based on your selection.
The router can also take Daylight Savings into
account. If you want to use this function, check the
Enable Function box to enable the Daylight Savings
configuration.
to start Daylight Savings Time.
to end Daylight Savings Time.
Click on this button to save your changes and go on
to the next screen.
CHAPTER 4: Quick Setup Wizard
Description
NOTE
27
Advertisement
Table of Contents
