Table of Contents
Advertisement
8. After adding a remote port for the print server, you can see the remote port's
name in the remote port list. The remote port's name consists of the print
server name and the port number, which are separated by a hyphen. For
example, if you assign "PtrSvr" as the print server name and select port "P1",
then the remote port's name will be "PtrSvr-P1". You can click Add to add
another remote port. Click Delete to delete a selected remote port. When you
have finished setting the remote port, click Exit to exit the setup tool. See
Figure 8-6.
X
9. Print server client tool installation is complete. You can start using the print
server.
Figure 8-6. Remote Port Setup window.
CHAPTER 8: Print Server
109
Advertisement
Table of Contents
