Table of Contents
Advertisement
Parameter
Enable DMZ
Public IP Address
Client PC IP Address
Apply button
Cancel button
1. If there is a conflict between the virtual server and the DMZ setting,
the virtual server function will have priority over the DMZ function.
2. You need to give your LAN PC clients a fixed/static IP address for
DMZ to work properly.
Click on the Apply button to save the configurations. You can now configure other
advanced sections or start using the router (with the advanced settings in place).
Table 5-30. DMZ parameters.
Click on Yes to enable DMZ.
Click on No to disable DMZ.
Type in the WAN port's IP address or any other
public IP addresses given to you by your ISP.
Type in a particular host's IP address in your LAN
that will receive all the packets originally going to
the WAN port/public IP address(es) above.
Click on this button to save your changes.
Click on this button to cancel the changes.
NOTES
CHAPTER 5: General Setup
Description
91
Advertisement
Table of Contents
