Table of Contents
Advertisement
Table 5-18. Special applications parameters.
Parameter
Trigger Port
Trigger Type
Public Port
Public Type
Enabled
Popular Applications
Copy to drop-down menu
Copy to button
1. The range of the Trigger Port is from 0 to 65535.
2. Individual port numbers are separated by a comma (for example,
47624, 5775, 6541, etc.). To add a port range, use a hyphen to
separate the two- port-number range (for example, 2300–2400).
3. Only one LAN client can use a particular Special Application at a
time.
Type in the outgoing (outbound) port number for this
particular application.
Click on TCP or UDP to select whether the outbound
port protocol is TCP or UDP.
Type in the incoming (inbound) port or port range for
this type of application (for example, 2300–2400,
47624).
Click on the inbound port protocol type (TCP or
UDP).
Check the enabled box to enable this particular
special application configuration.
This section lists the more popular applications that
require multiple connections. Select an application
from the popular applications drop-down menu.
Select a location (1–10) in the Copy to drop-down
menu.
Click on this button to list the public ports required for
this popular application in the location (1–10) you
specified.
NOTES
CHAPTER 5: General Setup
Description
71
Advertisement
Table of Contents
