Black Box LR9603A User Manual page 16

PURE NETWORKING BROADBAND ROUTER
2. Double-click the Network icon. The Network window will appear.
3. Check your list of Network Components. If TCP/IP is not installed, click
the Add button to install it now. If TCP/IP is installed, go to step 6.
4. In the Network Component Type dialog box, select Protocol and click
the Add button.
5. In the Select Network Protocol dialog box, select Microsoft and TCP/IP
and then click the OK button to start installing the TCP/IP protocol.
You may need your Windows CD to complete the installation.
6. After installing TCP/IP, go back to the Network dialog box. Select
TCP/IP from the list of Network Components, then click on the
Properties button. Figure 3-2 appears.
14
Figure 3-2. TCP/IP properties.