Table of Contents
Advertisement
7. Check each of the tabs and verify the following settings.
• Bindings: Check client for Microsoft Networks, and File and Printer
Sharing for Microsoft Networks.
• Advanced: Select the router's configuration.
• NetBIOS: Select the NetBIOS protocol.
• DNS Configuration: Select Disable DNS.
• Gateway: All fields are blank.
• WINS Configuration: Select Disable WINS Resolution.
• IP Address: Select Obtain IP Address Automatically.
8. Reboot the PC. Your PC will now obtain an IP address automatically
from your Pure Networking Broadband Router's DHCP server.
Make sure that the Pure Networking Broadband Router's DHCP server is
the only DHCP server available on your LAN.
Once you've configured your PC to obtain an IP address automatically, proceed
to step 3 on page 21.
2b. Windows XP
1. Click on the Start button and select Settings, then click on Network
Connections. The Network Connections window will appear.
2. Double-click on the Local Area Connection icon. The Local Area
Connection window will appear.
3. Check your list of Network Components. You should see Internet Protocol
[TCP/IP] on your list. Select it, and click on the Properties button. Figure
3-3 appears.
4. In the Internet Protocol (TCP/IP) Properties window, select Obtain an IP
address automatically and Obtain DNS server address automatically as
shown in Figure 3-3.
CHAPTER 3: Getting Started
NOTE
15
Advertisement
Table of Contents
