Fixed-Ip Xdsl - Black Box LR9603A User Manual

PURE NETWORKING BROADBAND ROUTER
Parameter
Host Name
MAC Address
Clone MAC Address
button
Release button
Renew button
Back button
OK button
Click on the OK button when you have finished the configuration above. The
configuration for the cable modem connection is complete. You can start using the
router now. If you want to use some of the advanced features supported by this
router, see Chapters 6, 7, and 8.
4.3.2 F -IP DSL
IXED X
Select Fixed-IP xDSL if your ISP has given you a specific IP address to use. Your ISP
should provide all the information required in this section. See Figure 4-4.
30
Table 4-3. Cable modem parameters.
If your ISP requires a host name, type in the host
name provided by your ISP. Leave it blank if your ISP
does not require a host name.
Your ISP may require a particular MAC address in
order for you to connect to the Internet. This MAC
address is the PC's MAC address that your ISP had
originally established your Internet connection to.
Type in the MAC address in this section.
Or, use the Clone MAC Address button to replace
the WAN MAC address with the MAC address of the
PC you are currently using. To find out what the PC's
MAC address is, see Appendix A. (See the
Glossary for an explanation of MAC address.)
Click on this button to release the WAN IP address.
Click on this button to renew the WAN IP address.
Click on this button to go back to the previous screen.
Click on this button to save your changes and go on
to the next screen.
Description