Table of Contents
Advertisement
5.4.4 ALG S
ETTINGS
Select applications for gateways operating at the ISO's Application layer. (See
Figure 5-19.) Table 5-20 tells you how to enable or disable Application Layer
Gateway (ALG).
Parameter
Enable
Apply button
Click on Apply at the bottom of the screen to save the above configurations. You
can now configure other advanced sections or start using the router with the
advanced settings in place.
Table 5-20. ALG parameters.
Select to enable Application Layer Gateway for an
application. The router will then let that application
correctly pass through the NAT gateway.
Click on this button to save your changes.
CHAPTER 5: General Setup
Description
73
Advertisement
Table of Contents
