Table of Contents
Advertisement
PURE NETWORKING BROADBAND ROUTER
Table 5-12 (continued). LAN port parameters.
Parameter
DHCP Server
IP Address Pool
Start IP
End IP
Domain Name
Lease Time
Apply button
Cancel button
60
Default
Enabled
—
—
—
—
—
Description
You can enable or disable the DHCP server.
By enabling the DHCP server, the router will
automatically give your LAN clients an IP
address. If the DHCP is not enabled, then
you'll have to manually set your LAN client's
IP addresses. Make sure the LAN client is in
the same subnet as the Pure Networking
Broadband Router if you want the router to
be your LAN client's default gateway.
Type in a particular IP address range
for your DHCP server to issue IP addresses
to your LAN Clients.
Type in a domain name for your LAN.
The DHCP, when enabled, will temporarily
give your LAN clients an IP address. In the
Lease Time setting, use the drop-down
menu to specify the time period that the
DHCP lends an IP address to your LAN
clients. The DHCP will change your LAN
client's IP address when it reaches this time
threshold period.
Click on this button to save your changes.
Click on this button to cancel your changes.
Advertisement
Table of Contents
