Table of Contents
Advertisement
PURE NETWORKING BROADBAND ROUTER
Parameter
Client PC Description
Client PC IP Address
Client PC Service
Protocol
Port Range
Scheduling Rule
Clear
Apply
You need to give your LAN PC clients a fixed/static IP address for the
access control rule to work properly.
78
Table 5-23. Add PC parameters.
Type in the PC's name.
Type in the IP address range that you wish to apply
to this access control rule. This is the user's IP
address(es) for which you want to set up an access
control rule. You can select a range of users simply
by typing the starting user's last digit (octet) IP
address and the last user's last octet IP address in
the appropriate boxes. If you want to select only one
user, then type in the user's last digit IP address in
both boxes.
You can block the clients from accessing some
Internet services by checking the services you want
to block.
Click on UDP or TCP to select the UDP or TCP
protocol type you want to block.
Type in up to five port ranges. The router will block
clients from accessing Internet services that use
these ports.
From the drop-down box, you can select one of the
scheduling rules you set previously. The router will
block the clients during the time in the scheduling
rule.
Click on this button to clear the screen settings.
Clicking on Apply (scroll to see it) saves the changes.
NOTE
Description
Advertisement
Table of Contents
