Table of Contents
Advertisement
Parameter
Current Password
New Password
Re-Enter Password
for Verification
Idle Time Out
Apply button
Cancel button
If you forget your password, you'll have to reset the router to the factory
default (no password) with the Reset button (see the router's back
panel).
Idle time "0" means no timeout; for example, no time restriction.
Click on the Apply button at the bottom of the screen to save the above
configurations. You can now configure other advanced sections or start using the
router (with the advanced settings in place).
By default there is no password.
Table 5-4. Password settings parameters.
Type in your current password for the remote
management administrator to login to the
Pure Networking Broadband Router.
Type in your new password.
Type in your new password again for verification
purposes.
Type in the time (in minutes) that the router will wait
for Web-based activity before logging out.
Click on this button to save your changes.
Click on this button to cancel your changes.
CHAPTER 5: General Setup
NOTE
Description
NOTE
NOTE
43
Advertisement
Table of Contents
