Table of Contents
Advertisement
PURE NETWORKING BROADBAND ROUTER
Parameter
Private IP
Private Port
Type
Public Port
Apply button
Cancel button
1. You need to give your LAN PC clients a fixed/static IP address for the
virtual server to work properly.
2. The virtual server function will have priority over the DMZ function if
there is a conflict between the virtual server and the DMZ settings.
Click on the Apply button to save the configurations. You can now configure other
advanced sections or start using the router (with the advanced settings in place).
68
Table 5-17. Virtual Server parameters.
Type in the LAN client/host IP address that the
private port number packet will be sent to.
Type in the port number (of the above private IP host)
that the below public port number will be changed to
when the packet enters your LAN (to the LAN
Server/Client IP).
Click on the port number protocol type (TCP or UDP).
If you are unsure, then leave it set to the default TCP
protocol.
Type in the service (service/Internet application) port
number from the Internet that will be redirected to the
above private IP address host in your LAN.
Click on this button to save your changes. (Scroll
down in the screen to see this button.)
Click on this button to cancel your changes. (Scroll
down in the screen to see this button.)
Description
NOTES
Advertisement
Table of Contents
