Table of Contents
Advertisement
PURE NETWORKING BROADBAND ROUTER
Menu
System
WAN
LAN
NAT
Firewall
Select one of the above General Setup selections and proceed to the manual's
relevant sub-section (Section 5.1 through 5.5).
38
Table 5-1. Advanced functions parameters.
This section allows you to set the Pure Networking Broadband
Router's system time zone, password, and remote management.
This section allows you to select the connection method in order to
establish a connection with your ISP.
You can specify the LAN segment's IP address, subnet mask,
enable/disable DHCP, and select an IP range for your LAN. You
also can configure the print server.
Configure the Address Mapping, Virtual Server, and Special
Applications functions in this section. This allows you to specify
what user/packet can pass your router's NAT.
The Firewall section allows you to configure Access Control,
Intrusion Detection, and DMZ.
Description
Advertisement
Table of Contents
