Table of Contents
Advertisement
PURE NETWORKING BROADBAND ROUTER
Parameter
Obtain an IP address
automatically
Clone MAC button
Use the following IP address
IP Address
Subnet Mask
Default Gateway
User ID
Password
L2TP Gateway
MTU
54
Table 5-10. L2TP parameters.
The ISP requires you to obtain an IP address by
DHCP before connecting to the L2TP server.
Click on this button to use the MAC address.
The ISP gives you a static IP to be used to
connect to the L2TP server.
Type in the IP address that your ISP has given
you to establish an L2TP connection.
Type in the subnet mask provided by your ISP
(for example, 255.255.255.0).
Type in the ISP gateway's IP address.
Type in the user name provided by your ISP for
the PPTP connection. This is sometimes called
a connection ID.
Type in the password provided by your ISP for
the PPTP connection.
If your LAN has an L2TP gateway, type in that
L2TP gateway IP address here. If you do not
have an L2TP gateway, type in the ISP's
gateway IP address.
This is optional. Type in the maximum size of
your transmission packet to the Internet. Leave it
as is if you do not want to set a maximum packet
size.
Description
Advertisement
Table of Contents
