Table of Contents
Advertisement
PURE NETWORKING BROADBAND ROUTER
Parameter
Enable Port Forwarding
Private IP
Type
Port Range
Comment
Add Port Forwarding
into the table
Remove Port Forwarding
from the table
Apply button
Cancel button
66
Table 5-16. Address Mapping parameters.
This enables you to redirect ports to a specific server.
This is the private IP for the server behind the NAT
firewall.
This is the protocol type to be forwarded. You can
choose to forward TCP or UDP packets only or select
both to forward both TCP and UDP packets.
The ports range to be forwarded to the private IP.
This setting's description.
Type in the Private IP, Type, Port Range, and
Comment for the setting to be added, then click on
Add. This Port Forwarding setting will be added into
the Current Port Forwarding table. If you make a
typing mistake before adding it and want to retype it
again, click on Clear to clear the fields.
If you want to remove some Port Forwarding settings
from the Current Port Forwarding table, select the
Port Forwarding settings you want to remove in the
table and then click on Delete Selected. If you want
to remove all Port Forwarding settings from the table,
click on the Delete All button. Click on Reset to clear
your current selections.
Click on this button to save your changes.
Click on this button to cancel your changes.
Description
Advertisement
Table of Contents
