Table of Contents
Advertisement
PURE NETWORKING BROADBAND ROUTER
5. Click on the Next button to start installation. The Utilities Installation window
(not shown here) appears on your screen.
6. The program will finish installing all the utilities and drivers. So far you've
only completed the installation phase and prepared to use the print server.
Next, you'll add a remote port for the print server. Click on the Add button to
add a remote port. See Figure 8-4. Or, click on the Delete button to cancel, or
the Exit button to exit.
7. You have to assign a print server name and enter the print server's IP address.
You can only select P1 or P2 (the router has only two print ports). After filling
in the data, click OK to proceed. See Figure 8-5. Or, click on Cancel to cancel
the changes without saving.
108
Figure 8-4. Remote Port Setup window.
IP Address: 196.168.2.1
Figure 8-5. Create Remote Port window.
Advertisement
Table of Contents
