Specifications; Classifications; Disposal Of Unit - DENTSPLY Cavitron JET Plus Installation And Service Manual

SECTION 12: Specifications
Electrical Voltage
Current
Phase
Frequency
Water Pressure
Air Pressure
Water Flow Rate
Weight
Dimensions
Footswitch
Remote Communication
Operating Environment
Transport and Storage Conditions
SECTION 13: Classifications
• Type of protection against electric shock:
• Degree of protection against electric shock:
• Degree of protection against the harmful ingress of water:
• Mode of operation:
• Degree of safety of application in the presence of a flammable
anaesthetic mixture with air or with oxygen or nitrous oxide:
• According to medical device directive:
SECTION 14: Disposal of Unit
• Accordance with local and state laws.
Continuous (100-240 VAC)
1.0 Amperes, Maximum
Single
50/60 Hertz
20 to 40 psig (138 to 275 kPa)
65 to 100 psig (448 to 600 kPa)
Minimum Setting (CCW) < 15 ml/min
Maximum Setting (CW) > 55 ml/min
4.4 lbs (2 Kg)
Height: 6 in (15,24 cm)
Width: 9.5 in (24,13 cm)
Depth: 8 in (20,32 cm)
Handpiece Cable length: 6.5 ft. (2.0 M)
Auxillary Footswitch Cable length: 8 ft. (2.4 M)
Water Supply Line length: 8 ft. (2.4 M)
Air Supply Line length: 10 ft. (3.04 M)
Protection Class IPX1. Not for operating theatres.
Frequency: 2405 to 2480 MHz
Power: < 1mW
Channels: 16
Temperature: 15 to 40 Deg. Celsius (59 to 104 Deg. Fahrenheit)
Relative Humidity: 30% to 75% (non-condensing)
Temperature: -40 to 70 Deg. Celsius (-40 to 158 Deg. Fahrenheit)
Relative Humidity: 10% to 100% (non-condensing)
Atmospheric Pressure: 500 to 1060 hPa
Class 1
Type B
Ordinary
Continuous
Equipment not suitable for use in the presence of
flammable anaesthetic or oxygen.
IIA (rule 9)
21