Table of Contents
Advertisement
Specifications
•
Console Dimensions:
•
Weight:
. . . . . . . . . . . . . . . .1.6 kg (3.6 lbs)
•
Power Source:
•
Current Rating:
•
Fuses: 115V:
230V:
•
Plugger: . . . . . . . . . . . . . . . .Stainless Steel
•
Capsule Contents:
•
Capsule: . . . . . . . . . . . . . . . .Aluminium
•
Cannula: . . . . . . . . . . . . . . . .Silver
•
Environmental Conditions:
Operating Temperature:
ª
ª
Storage Temperature:
Relative Humidity:
ª
ª
Altitude:
•
Pack Duty Cycle:
•
Temperature range Pack:
•
Volume range Pack: . . . . . . .0 - 100%
•
Temperature range Flow:
•
Flow rate Flow:
Pack handpiece maximum continuous heating time:
•
10 seconds for temperatures above 200°C.
•
15 seconds for temperatures at or below 200°C.
•
One minute in thermal response mode.
MEDICAL ELECTRICAL EQUIPMENT
WITH RESPECT TO ELECTRIC
SHOCK, FIRE AND MECHANICAL
HAZARDS ONLY IN ACCORDANCE
WITH UL 60601-1 (First Edition) and
41EJ
CAN/CSA C22.2 No 601.1-M90.
Caution:
This device has been tested and found to comply with the emissions requirements of IEC
60601-1-2:2001-09. These requirements provide reasonable protection against harmful
electromagnetic interference in a typical medical installation. However, high levels of radio-
frequency emissions from electrical devices, such as cellular phones, may disrupt the
performance of this device. To mitigate disruptive electromagnetic interference, position this
device away from radio frequency transmitters and other sources of electromagnetic energy.
. . . . . .11.2 x 15.0 x 15.2 cm
(4.4" x 5.9" x 6.0")
. . . . . . . . . . .115V/60Hz, 230V/50Hz
. . . . . . . . . .115V/0.6A, 230V/0.3A
. . . . . . . . . . . .0.6A/250V Slo-Blo
. . . . . . . . . . . .0.3A/250V Slo-Blo
. . . . . . . .Gutta-Percha
10° to 28°C (50° to 82.4°F)
-20 to 60°C (-4° to 140°F)
5 to 95 % non-condensing
0 to 3048 meters (0 to 10,000 feet)
. . . . . . . . .25%
. .100 - 400°C
. .160 - 200°C
. . . . . . . . . .20% - 100%
fuse
®
fuse
®
3
Hide quick links:
Advertisement
Table of Contents
