Table of Contents
Advertisement
6.6 Installation of Eyepieces
The eyepieces are inserted into the eyepiece
tubes.
Note:
We recommend running a teach-in via the Leica
Application Suite (LAS) software when using
eyepieces not included in the scope of delivery.
This will ensure that the total magnification
shown in the LeicaScreen is correct.
Fig. 44
Eyepieces
Fig. 45a Objective turret
6.7 Installation of Objectives
The positions in the objective turret disk are num-
bered (Fig. 45). Depending on your equipment, the
individual objectives have already been assigned
to specific positions at the factory.
For details on the exact positions of the objec-
tives, please refer to the enclosed identifica-
tion sheet.
!
Caution:
Close vacant threads in the nosepiece with dust
protection caps!
Please note that the front lenses of the objec-
tives point upward and are therefore more vul-
nerable to contamination than those of upright
microscopes.
Check the front lenses for cleanliness frequently.
Note:
We recommend running a parfocality compen-
sation via the Leica Application Suite (LAS) soft-
ware.
Fig. 45b Objective turret, loaded
6. Assembly
39
Advertisement
Table of Contents
