Note: After making the changes to the MFP settings, it is recommended to power off and open right side door, let sit for 3-5 minutes. When the machine cools

down to a certain temperature, a full initialization will pick up the changes to the MFP's settings.

SPECIAL NOTE: Solution contribution by Don St. Onge, Workgroup/SSD

TAUS0902084EN*

Solution ID

Description

How to push driver properties down to clients from a Netware server.

Solution

Bcause of the nature of how drivers are installed in the NDPS database, driver properties can not be saved.

Novellacknowledged this limitation; inNetware 6.5 and above there is a function called the Driver Profile.Use the following instructions to allow driver

properties to be downloaded from the client when the printer driver is downloaded from the NDPS database.

Before creating the profile, the following items must be installed on the Netware 6.5 server:

1.SP5 or above, including all patches.

2.iPrint version 4.2.8 or higher.

3.TheiPrint LIB files must be updated.

These files can be found at http://www.novell.com

To install:

1.In Novell iManager, click iPrint > Print driver profile.

2.Browse to and select the print manager where you want the driver profile stored and made available to the printers on that manager

3.Select an operation and click OK (create, delete, modify)

After creating a printer driver profile associate it with a printer:

1.In Novell iManager, click iPrint > Manage printer.

2.Browse to and select the printer you want to modify.

3.Click drivers > printer_driver_operating_system.

4.Select the printer driver from the list of available printers.

5.Select the profile you want associated with this driver from the list of available driver profiles for the selected driver

6.Select OK to save the changes.

Note:If you experience winsock 11004 issues when creating the driver profile, update the local HOSTS file on the workstation with the IP address of the server

and its DNS entry.

SPECIAL NOTE: Solution contribution by Paul Santangelo, ESS/BSE

Solution ID

TAUS0902136EN*

Description

While upgrading the firmware on a MPI LinkCom™ III print server using Microsoft® Windows Vista™, the update may fail.

Solution

CAUSE: Anomalywhen attempting firmware install using Microsoft® Windows Vista™.

SOLUTION:The only known solution is to use Microsoft® Windows XP and recycle the print serverbefore performing the upgrade again.

SPECIAL NOTE : Solution contribution by Paul Santangelo, ESS/SSD

Solution ID

TAUS0902147EN*