Konica Minolta bizhub 250 Ssd Support Solutions page 137

bizhub 250
2. Select Soft Switch Settings.
3. Mode 422.
4. Bit selection 5-3 all zeros (default is 2 clicks for 11x17; bit 3 was1).
5. HEX selection should now be 40; was 48.
TAUS0702832EN*
Solution ID
Description
Thedocument feederwill feed about 5 sheets of paper and then jam.
Solution
CAUSE: The registration sensor (PC9)actuator was not returning properly. It may have been knocked out of its mount.
SOLUTION: Please check and reposition the registration sensor actuator.
TAUS0702888EN*
Solution ID
Description
How to print to a printer on a Microsoft® Windows XP PC from a Macintosh® running OS version 10.4.x.
Solution
Please perfrom the step-by-step procedure mentioned in the attached document.
Note : To view a PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free from the Adobe® web site at:
http://www.adobe.com/products/acrobat/readstep2.html
TAUS0703009EN*
Solution ID
Description
"Now printing" message.Jam indicated in the conveyance path and Tray 1.
Solution
CAUSE : Charge corona arcing to non-image edge of the drum.
SOLUTION: Replace the drum unit (Item #4068612).
TAUS0703037EN*
Solution ID
Description
How to test SMTP communication using Telnet.
Solution
Pleaserefer to the following links:
http://www.messagingtalk.org/content/470.html
http://support.microsoft.com/kb/153119
Search for the subject on the Internet for more information.
SPECIAL NOTE : Solution contribution by KM Europe (BEU).
Solution ID TAUS0703075EN*
Description
The machine detects A4 size paper when opening/closing the ADF.
Solution
CAUSE:An incorrect setting in the Service mode.
SOLUTION: To correct:
1. Enter Service mode.
2. Select System Input.
3. Select Original size detection option.
4. Setto NO.
Note : This setting is for the optional metric size detection sensors not used in the U.S.
Solution ID TAUS0703077EN*
Copyright 2009, Konica Minolta Business Solutions U.S.A., Inc.
137
1
Solution Usage
1
Solution Usage
1
Solution Usage
1
Solution Usage
Solution Usage 1
Solution Usage 1
October 2009