Konica Minolta bizhub 250 Ssd Support Solutions page 13

bizhub 250
Solution ID TAUS0702848EN*
Description
PROBLEM: A line is scored into the rear side of a new drum after a copy is made.
Solution
CAUSE: Worn or bound drum collars. The drum collars are mounted on either side of the transfer roller. When the collars become worn, the distance
between the drum and the roller frame becomes less and the drum may contact the frame, causing a line to be scored into it. If the collars are beginning to
bind, this may also cause undo pressure on the drum and create a line.
SOLUTION: Replace the imaging unit(p/n 4040-0752-00) to correct the problem.
TAUS0701059EN*
Solution ID
Description
Dotted lines on copies and internal prints.
Solution
CAUSE: Failed Write Unit.
SOLUTION: Replace the Write Unit (p/n 4040 0751 00 - bizhub 350and p/n 4041 0751 00 - bizhub200/250).
TAUS0802036EN*
Solution ID
Description
Problem:
Half tones are blacked out if a RX fax is copied.
Solution
Cause:
When relaying a RX fax, the resolution was not adjusted for Text/Photo 400x400
Solution:
When sending out the received fax to another fax, change resolution to Text Photo 400x400.
SPECIAL NOTE: Solution contribution by Don St. Onge, Workgroup/SSD
TAUS0902552EN*
Solution ID
Description
DF-605, when feeding originals from the ADF, copies are blurred for the first 25mm on the lead edge.
Solution
CAUSE: The original glass assembly (slit plate glass) is interfering with original feed.
SOLUTION: Replace slit plate glass (p/n 4551 2031 01) and perform the DF height adjustment.
SPECIAL NOTE : Solution contribution by David Holt, SSD District Service Manager/Midwest Region
Copyright 2009, Konica Minolta Business Solutions U.S.A., Inc.
Dirty image - Spots, banding, streaks, smudged or background
13
Solution Usage 3
2
Solution Usage
Solution Usage
Solution Usage
October 2009