Konica Minolta bizhub 250 Ssd Support Solutions page 132

bizhub 250
CAUTION: The connectors in the back of the machine must be disconnected first.
Solution ID TAUS0651192EN*
Description
Overlay printing capabilities.
Solution
The PCL* driver has the option to create and print overlays.
* Trademark ownership information
Solution ID TAUS0651461EN*
Description
Machine locks up when copying, scanning or printing. Memory % indication will change but will not clear until Data Clear is performed.
Solution
CAUSE: Communication issue between the MFS and the PWB-A.
SOLUTION: Access the MFBS from the machines right side and rear. Disconnect the two harnesses from the rear and remove the MFBS. Reseat the
memory chips and reinstall MFBS. Verify operation.
Solution ID TAUS0651562EN*
Description
Microsoft®-certified printer drivers - PCL, PostScript, PostScript (P)and PostScript (V).
Solution
The Konica Minolta Microsoft®-certified printer driverscan bedownloaded fromthe Konica Minolta Download Selector. Access the Selector from theKMBS
public site ( http://www.kmbs.konicaminolta.us ) Support & Drivers tab or from SSD Web Support (CS Expert Support) by clicking on 'Download MSDS,
Drivers, Firmware and more'.
These drivers will be shown as a WHQL ( W indows H ardware Q uality L abs)Download.
Access the Download Selector and type WHQL in [Find downloads:],then click on Search->.
TAUS0651563EN*
Solution ID
Description
Are the bizhub 250 PCL* and PostScript* drivers Microsoft*-certified?
Solution
The Konica Minolta 250 PCL and PostScript drivers are Microsoft-certified. Microsoft-certified drives are listed on the [[Windows Marketplace Tested
Products List| URL http://testedproducts.windowsmarketplace.com/results.aspx?&text=Konica%20Minolta&bCatID=0&cpID=0&ocID=0&OR=1&PG=1]].
Note: Scroll through the available pages to obtain a complete listing of Konica Minolta Microsoft-certified drivers.
* Trademark ownership information
Solution ID TAUS0651742EN*
Description
DF605, when copying an 11x17 original, the last two inches of the copy are deleted. All other original sizes copy correctly.
Solution
CAUSE: The trail edge of the original is curled which does not allow the paper size photosensor on the ADF paper tray to detect the correct size.
SOLUTION: Ensure that the trail edge of the original lies flat or set up themachine for Mixed Original Detection. To enable Mixed Original Detection, perform
the following:
1. While in Copy mode, press the Utility key.
2. Select User Setting.
3. Select User's Choice.
4. Select Mixed Original Detection and turn ON.
5. Press Reset to exit mode.
TAUS0651789EN*
Solution ID
Copyright 2009, Konica Minolta Business Solutions U.S.A., Inc.
132
Solution Usage 1
Solution Usage 1
Solution Usage 1
1
Solution Usage
Solution Usage 1
1
Solution Usage
October 2009