Konica Minolta bizhub 250 Ssd Support Solutions page 34

bizhub 250
7. When the message indicating completion of the clearing sequence appears, touch [OK].
Note : When Total Clear is performed the following settings are cleared and must be reapplied:
Fax-related setting information
Bulletin board setting information
Transmission/reception log information
Image data
Network setting information
Destination information
Soft switch information
Management-by-account setting information
User authentication setting information
Account/user counter
Remote maintenance setting information
FW download setting information
Copy setting information (zoom ratio, paper size, erase width, paper source detailed information, copy job program, bypass free size registration, etc.)
CSRC setting information
Please review the attached document for more detail. To viewthe PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free from
the Adobe® web site at: http://www.adobe.com/products/acrobat/readstep2.html .
SPECIAL NOTE : Solution contribution by Chuck Tripp and Mike McCarthy, Production Print/SSD
TAUS0802799EN*
Solution ID
Description
Enabling User Name and Password for SMTP Authentication.
Solution
SMTP Authentication
Note : Before starting, make sure NC-4 and SU-2 or SU-3 are installed. ROM versionmust becurrent.
1. Login Admin mode onMFP panel.
2. Select Admin2.
3. Open "SoftSW setting" and set "SoftSW 380, Bit6=1 and Bit2=1".
4. Save Settings.
5. Open "Network Set" and "SMTP Setting".
6. Set SMTP Server Address (TCP/IP address of Mail Server).
7. Set "E-mail Address"
8. Set "SMTP AUTH User Name"
9. Set "SMTP AUTH Password"
10. Save Settings.
Note : If you get error code EA21C6, it means Authentication method error. If you get error code E72217, it means User ID or Password is incorrect.
WithSU-3:
If you want to share POP3 User name and password as SMTP Auth User name and Password, set "SoftSW 380, Bit6=1 and Bit2=0".
Set the POP3 user name and password on "Network Set" and "POP3 Setting".
This method will use CRAM-MD5, Login or Plain authentication.
CAUTION : If you set SoftSW 380, Bit6=1, URL report function with Scan to Server (FTP), HDD will notwork.
SPECIAL NOTE : Solution contribution by Cesar Jimenez, Production Print/SSD
Solution ID TAUS0807951EN*
Description
How to get the number of the fax line when it is not published.
Solution
CAUSE: No cover Sheet with number or the id on machine is the name of the customer without a number.
SOLUTION: Technician can dial 1 800 444 4444, this number will provided a greeting and state the number you are calling from.
SPECIAL NOTE: Solution contribution by Don St. Onge, Workgroup/SSD
Solution ID TAUS0650458EN*
Description
FK-503, why no dial tone on the ML-502 when pressing the monitor button.
Solution
Copyright 2009, Konica Minolta Business Solutions U.S.A., Inc.
34
Miscellaneous
3
Solution Usage
Solution Usage 3
Solution Usage 2
October 2009