e.The default setting of "PostScript Pass Though" is configured with "Enable" in PostScript driver. Please change the setting from "Enable" to " Disable".

Note :Whenwanting to keep this feature as "Disable", pleaseperform the following:

A. Select "Start" and then "Printers and Faxes" on Microsoft® Windows OS.The folder of "Printers and Faxes" is opened.

B. Select PostScript driver with right-click, and then select "Properties". PostScript driver properties is opened.

C. Select "General" tab in PostScript driver properties.

D. Click "Printing Preferences" in "General" tab.

E. Select "Advanced" tab.

F. The default setting of "PostScript Pass Though" is configured with "Enable" on PostScript driver.

G. Please change the setting from "Enable" to " Disable" in PostScript driver properties. Due to this change, the setting of "Disable" is kept as default setting

even if PC is powered OFF.

6. With regard toprinting from Adobe® Acrobat Professional, there is a possibility increasing printing speed with the color PDF file on B&W models by

using "Same As Source (No Color Management)".

a. Open PDF file to print.

b. Select "File", and then "Print". The print screen is open.

c. Click "Advanced" tab at the print screen.

d. Please select "Same As Source (No Color Management)" at Color Profile in the advanced print setup.

Note : Please be aware, the print performance will not be increased just byinstalling the Hard Disc and expanded memory to bizhub 200/2500/350 series.

Results of the measured time and the feature in file .

See page 1 of the attachment. To view a PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free from the Adobe® web site at:

http://www.adobe.com/products/acrobat/readstep2.html

1.Comparing with the non-modified bizhub 200 series systems.

Though this modification improves the processing speed from theoriginal level, it does not improve remarkably on all types of print files.

2. Comparing with Pi3505e.

Print performance is not basically inferiorto that the performance ofPi3505e except a certain specific files.

3. Comparing with HP LJ8150.

When comparing with HP LJ8150, the performance is similar, but for some cases,Konica Minoltaprint performance is lower than HP LJ8150 especially if the

image files have the below characteristics:

a. Color photo/Color gradation

b. A line drawing

Therefore, when printing the file with no above characteristics,Konica Minoltaprint speedshould beclose toHP LJ8150.

Note : Though this modification improved the processing speed (both PostScript & PCL) from the current level, it did not improve remarkably on all

types of print files. It is because there are many factors that affect the processing speed and the machine still uses the same CPU. Due to this modification,

the print performance is increased on most print files as the attached data but it is true there are some types of print files that the print performance stayed

unchanged.

TAUS0702641EN*

Solution ID

Description

How to print envelopes from Microsoft® Office Word 2000/2003 from the manual bypass tray.

Solution

To print envelopes from Microsoft® Office Word 2000/2003 from the manual bypass tray:

1. On the MFP, insert the envelopes face down in the manual bypass tray.

2. Under Custom Size setting enter the size of the envelope to be printed on Number 10 envelope (4 1/8" X 9 ½"). 3. In Word, go to:

a. Tools.

b. Letters and Mailing.

c. Envelopes and Mailing.

d. Click on Options.

e. Select Envelope Options - Envelope Size 10.

f. Select Printing Options.

g. Choose feed from: Default Tray [Auto].

h. Click OK.

i. Select Print.

In Microsoft® Windows XP using Word 2003 sometimes you may see the following:

Envelope Options

Printing Options

Feed From: Automatically Select

Notes :

1. From the MFP, leave the Bypass Trayat Normal. Please see the attached document for detailed instructions. To view the document, Microsoft® Word® or

Word® Viewer must be installed. Word® Viewer 2003 (11.7MB) can be obtained free from Microsoft® at the following URL;

http://www.microsoft.com/downloads/details.aspx?DisplayLang=en&FamilyID=95e24c87-8732-48d5-8689-ab826e7b8fdf .

2. To assure proper fusing of the envelopes, please set the fuser temperature in the Service mode to +3. Without this setting the toner can be wiped off easily

depending on the type and quality of the envelope used.

SPECIAL NOTE : Solution contribution by by Joseph Rogers, KMBS -Salem, New Hampshire.

Miscellaneous

Solution Usage

October 2009