Konica Minolta bizhub 250 Ssd Support Solutions page 151

bizhub 250
Sensor checking in the I/O check mode.
Solution
When checking sensor operation in the I/O check mode, it is normal operation for these machines to have a delay before showing change of state. When
activating a sensor, there may be a 2-3 second delay before the screen shows a change of state, and after releasing the sensor, could take 5-7 seconds for
the screen to change back.
Solution ID TAUS0701780EN*
Description
DF-605,both sides of the originals scanned when carrying out a fax TX.
Solution
CAUSE:Soft SwitchMode 33, Bit 6 has been set to1.
SOLUTION; Soft SwitchMode 33, Bit 6 can be changed to prevent both sides of the originals being scanned using the following steps:
1. Enter Service Mode.
2. Select Soft Switch Settings.
3. Choose Mode Selection and enter 33.
4. Choose Bit Selection and scroll to Bit 6.
5. Change Bit 6 from1 to0.
6. Press Enter.
7. Press Exit.
Solution ID TAUS0701784EN*
Description
Is there a way to disable the busy tone and still hear the dialing for faxing?
Solution
The line monitor is used to monitor both the busy tones and the dial tones. It would be impossible to silence the busy tones and not the dial tone. Both would
have to be silenced.
Solution ID TAUS0701787EN*
Description
How to disable the unit from printing a confirmation report when receiving a fax.
Solution
To disable the unit from printing a confirmation report when receiving a fax, perform the following:
1. Press [Utility/Counter].
2. Select [Admin. Management] and enter passcode (00000000) default and press END.
3. Press [Admin1].
4. Press [Document Management].
5. Select [RX Document].
6. Touch [All other Documents].
7. Touch [RX. Doc. Settings].
8. Select [print].
Note : If the received fax is forwarded to a one-touch, then the one-touch destination isnot working correctly and must be corrected to resolved the problem.
Solution ID TAUS0702146EN*
Description
How to perform Print Screens (screen shots) from a Microsoft® Windows OS and Macintosh® OS.
Solution
Please see the attacheddocument for detailed information.
Note : To view a PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free from the Adobe® web site at:
http://www.adobe.com/products/acrobat/readstep2.html
Solution ID TAUS0702206EN*
Description
Fax transmission does not work; fax reception (RX) is OK.
Solution
CAUSE: Invalid configuration. Thefax multi line kit (ML-502)is installed, but only one phone line is connected.
Copyright 2009, Konica Minolta Business Solutions U.S.A., Inc.
151
Solution Usage
Solution Usage
Solution Usage
Solution Usage
Solution Usage
October 2009