Konica Minolta bizhub 250 Ssd Support Solutions page 12

bizhub 250
Defective MFBS board.
Solution:
Please try replacing the MFBS board (p/n 4551 2038 01).
SPECIAL NOTE: Solution contribution by David Silverstein, Workgroup/SSD
TAUS0900943EN*
Solution ID
Description
No Address Found when performing LDAP search to Netware server
Solution
CAUSE:The attribute "statusMember"on the Novel LDAP server was missing or bad.
SOLUTION:Using iManager, under LDAP,find the attribute"statusMember"and map the attributeStatusMember to member:x-status. Click OK.The names
should start to be pulled in the LDAP search.
SPECIAL NOTE: Solution contribution by Paul Santangelo, ESS/BSE
Solution ID TAUS0901613EN*
Description
Select job cannot be deleted when deleting a job from the job list. Deletion rights not granted. User authentication is enabled on the machine.
Solution
CAUSE: This is normal for when User Authentication is enabled. User that is trying to delete the job is either not logged in or a different user then the sender.
Solution: Log into the machine if you are the sender before selecting the job to delete. Users only have rights to delete their own jobs.
SPECIAL NOTE: Solution contribution by Jim Behrends, Workgroup/SSD
TAUS0902105EN*
Solution ID
Description
How to determine the print data stream of a spool file
Solution
To determine the print stream that a spool file has been created in, use the following command:
wrkoutq
1. On the resulting screen, locate the queue that contains the spool file. Useoption 5 to display the spool files.
2.On the resulting list, enter option 8 besides the desired spool file.
The attributes for the spool file will be displayed. Page down to the next screen and locate Printer device type. To the right, you will see the data stream type:
*SCS, *IPDS *AFPDS,*USERASCII, or others.
This information is important to determine which print server to use in orderto print the spool file.
SPECIAL NOTE: Solution contribution by Paul Santangelo, ESS/BSE
Copyright 2009, Konica Minolta Business Solutions U.S.A., Inc.
Controller - no or slow print, scan failure, garbled data, lockup
12
Solution Usage
Solution Usage
Solution Usage
October 2009