Konica Minolta bizhub 250 Ssd Support Solutions page 20

bizhub 250
Solution ID TAUS0703605EN*
Description
Light images only while copying. Printing and internal test prints are fine.
Solution
CAUSE: The BCRS board has failed.
SOLUTION: Replace the BCRS (p/n 4551 2033 01 for bizhub 350 and p/n 4551 2034 01 for bizhub 200/250).
SPECIAL NOTE : Solution contribution by Tom Kelly and Jim DiSarro, Workgroup/SSD
Solution ID TAUS0900225EN*
Description
When feeding fromthe DF-605, copies are lighter (or darker) than when copying from the glass.
Solution
CAUSE:Incorrect setting.
SOLUTION:To adjust the DF image density only, perform the following:
1. Press the Utility/Counter button.
2. Select User Setting.
3. Select User's Choice.
4. Go to tab 6/6.
5. Select Image Quality (ADF).
6. Use the upand down arrows to adjust the document feeder image density.
7. Press Enter and exit the Utility mode.
SPECIAL NOTE : Solution contribution by Bill Hall, Workgroup/SSD
TAUS0801300EN*
Solution ID
Description
How to change density levels on output.
Solution
To change density levels on output:
1. Utility Counter.
2. User Settings.
3. User Choice.
4. Select the 4/6 tab.
5. Default Copy Density Levels.
6. Change to Darker or Lighter settings.
7. Enter/Enter/Enter.
8. Exit.
SPECIAL NOTE : Solution contribution by Marge McLea, Production Customer Support/SSD
Solution ID TAUS0802243EN*
Description
Light image along the back edge in the lead-to-trail direction.
Solution
CAUSE: Improper mounting of drum/developing unit.
SOLUTION: Tighten the screws holding the drum onto the developing unit.
SPECIAL NOTE : Solution contribution byEd Chambliss, Mipco Impression Products.
Copyright 2009, Konica Minolta Business Solutions U.S.A., Inc.
Image too light, dark, uneven or wrong color
20
Solution Usage 2
Solution Usage 1
Solution Usage
Solution Usage
October 2009