Fax; Modem; Faculty; Panel - Canon L100 Service Manual

FAX

■ MODEM

TESTMODE > FAX > MODEM
Small Item
RELAY-1 CML : Test ON/OFF of port SW and relay on NCU
Setting value: ON, OFF
H : Test ON/OFF of port SW and relay on NCU
Setting value: ON, OFF
FREQ Transmit selected frequency in closed DC circuit using tone generation
function of modem.
[Setting values]
462 Hz
1100 Hz
1300 Hz
1500 Hz
1650 Hz
1850 Hz
2100 Hz
G3TX Transmit selected signal pattern in closed DC circuit at selected
frequency using G3 signal transmission function of modem.
[Setting values]
300b bps
2400 bps
4800 bps
7200 bps
9600 bps
TC7200
TC9600
12000 bps
14400 bps
DTMFTX Transmit DTMF signal using DTMF transmission function of modem
after DC circuit closure.
V34G3TX Transmit selected frequency using G3 signal transmission function
(V.34) after DC circuit closure.
[Setting values]
SPEED
4800 bps
3429 bps
3200 bps
3000 bps
2800 bps
2743 bps
2400 bps
8
Service Mode > TESTMODE > PANEL
Description
T-8-49
8 Service Mode > TESTMODE > PANEL

■ FACULTY

TESTMODE > FAX > FACULTY
Small Item
G34800TX Transmit the frequency of 4800bps using G3 signal transmission
function after DC circuit closure.
DETECT1 Ring detection
Check the status (ON, OFF) of hook and Ci, Fc from i line.
CI
CIFREQ
HOOK
FC
DETECT2 CMG detection test 1
Execute CMG signal check and FED check.
Detect CMG after CML relay is ON.
CMG
FED
CML
DETECT3 CMG detection test 2
Execute CMG signal check and FED check.
Detect CMG after CML relay is OFF.
CMG
FED
CML

PANEL

TESTMODE > PANEL
Small Item
KEY CHECK START Key check
[Applicable case]
Check if all keys functions normally after replacement of Control Panel.
LED CHECK START LED check
[Applicable case]
Check if all LEDs are lit normally after replacement of Control Panel.
LCD CHECK START LCD check
[Applicable case]
Check if LCD can display without any missing dot after replacement of
Control Pannel.
8-16
Description
T-8-50
Description
T-8-51
8-16