Toner Safety; About Toner; Handling Adhered Toner; Notes On Handling Lithium Battery - Canon L100 Service Manual

Toner Safety

About Toner

Toner is a non-toxic material composed of plastic, iron, small amount of pigment, etc.
Never throw toner in flames to avoid explosion.

Handling Adhered Toner

• Use dry tissue paper to wipe off toner adhered to skin or clothes and wash in water.
• Never use warm water for cleaning up toner to prevent toner particles from being able to
soak into fibers permanently.
• Toner particles are reactive with vinyl polymers. Avoid contacting these materials.

Notes on Handling Lithium Battery

CAUTION:
The battery installed in this machine is fixed and cannot be replaced.
When disposing of an old battery, remove it from the PCB and follow the
local regulation.
The following warnings are given to comply with Safety Principles (EN60950).
Achtung:
Wenn mit dem falschen Typ ausgewechselt, besteht Explosionsgefahr.
F-0-3
Gebrauchte Batterien gemäß der Anleitung beseitigen.

Notes on Assembly/Disassembly

Follow the items below to assemble/disassemble the device.
1. Disconnect the power plug to avoid any potential dangers during assembling/disassembling
works.
2. If not specially instructed, reverse the order of disassembly to reinstall.
3. Ensure to use the right screw type (length, diameter, etc.) at the right position when
assembling.
4. To keep electric conduction, binding screws with washers are used to attach the grounding
wire and the varistor. Ensure to use the right screw type when assembling.
5. Unless it is specially needed, do not operate the device with some parts removed.
6. Never remove the paint-locked screws when disassembling.
0-12
0-12