Canon L100 Service Manual page 113

4
Disassembly/Assembly > Original Exposure System > Removing the ADF Upper Unit (L150 EUR/L150 AUS) > Procedure
[1]
2) Insert the Arm Shaft [1] into the holder groove [A] while holding the ADF Unit, and pull it in
the direction of the arrow to install the arm.
CAUTION:
Be careful not to get fingers caught between the arm [1] of the ADF Unit and the Upper
Cover when assembling.
4 Disassembly/Assembly > Original Exposure System > Removing the ADF Upper Unit (L150 EUR/L150 AUS) > Procedure
[4]
[2]
[3]
F-4-116
[1]
F-4-117
[1]
[A]
3) Close the ADF Unit.
4) Disconnect the terminal [1] of the Grounding Wire.
• 1 Screw [2]
5) Remove the ADF Harness Guide [3].
• 1 Claw [4]
• 2 Hooks [5]
[2]
[1]
[3]
4-59
F-4-118
[5]
[5]
[4]
F-4-119
4-59