Testmode; System; Dram; Speaker - Canon L100 Service Manual

TESTMODE

SYSTEM

■ DRAM

TESTMODE > SYSTEM > DRAM
Small Item
TEST1 Data read/write check for DRAM (except system work area)

■ SPEAKER

TESTMODE > SYSTEM > SPEAKER
Small Item
ON Volume level is stepped up by 1 from minimum to maximum every time pressing
OK key. When the volume level is reached to maximum, it changes to silence and
minimum volume.
MIN Play with minimum volume by pressing OK key.
MAX Play with maximum volume by pressing OK key.
8
Service Mode > TESTMODE > SCAN > ADFTEST
Description
T-8-44
Description
T-8-45
8 Service Mode > TESTMODE > SCAN > ADFTEST

SCAN

■ ADJUST

● ADF-ADJ
TESTMODE > SCAN > ADJUST > ADF-ADJ
Small Item
DF-SPEED Enter the adjustment value for the magnification ratio in vertical
scanning direction in stream feeding
Unit : 0.1 %
Setting range: -30 ~ 30
DF-OFFSET Enter for the adjustment of DF original stop position
Unit : 0.1 mm
Setting value: -30 ~ 30

■ SENSOR

TESTMODE > SCAN > SENSOR
Small Item
TRAY PAPER SENS Display the status of Multi Pickup Sensor
ON: Paper existing OFF: No paper
REGI SENS Display the status of Leading Edge Sensor
ON: Paper existing OFF: No paper
ESS DOOR SENS Display the status of Delivery Tray Open/ Close Switch
ON : Close OFF : Open

■ ADFTEST

TESTMODE > SCAN > ADJUST > ADFTEST
Small Item
SPEED For testing of ADF feeding speed. Execute feeding test of ADF motor at
specified speed.
[Setting value]
STD-FAX
Fine-FAX
SFine-FAX
Copy
COUNT Page counter for originals: Existing
START Start feeding
8-15
Description
T-8-46
Description
T-8-47
Description
T-8-48
8-15