Canon L100 Service Manual page 120

4
Disassembly/Assembly > Original Exposure System > Removing the ADF Upper Unit and ADF Lower Unit (L150 EUR/L150 AUS) > Procedure
[1]
4) Place the Arm Shaft [1] of the ADF Unit temporarily by inserting it into the groove [A] of the
holder.
[1]
[A]
4 Disassembly/Assembly > Original Exposure System > Removing the ADF Upper Unit and ADF Lower Unit (L150 EUR/L150 AUS) > Procedure
[4]
[2]
[3]
F-4-139
F-4-140
CAUTION:
Be careful not to get fingers caught between the arm [1] of the ADF Unit and the Upper
Cover when assembling.
NOTE:
Be sure to insert the Arm Shaft [1] into the holder groove [A] while holding the ADF Unit,
and pull it in the direction of the arrow to install the arm when assembling.
[1]
[A]
4-66
[1]
F-4-141
F-4-142
4-66