Canon L100 Service Manual page 102

4
Disassembly/Assembly > Controller System > Removing the Fixing Delivery/Paper Width Sensor PCB > Procedure
2) Disconnect the terminal [1], and free the Transfer High Voltage Harness [2] from the
Harness Guide [A].
3) Remove the Harness Retaining Spring [3] from the 2 hooks [B].
[1]
[2]
[A]
4) Disconnect the 4 connectors [1].
x4
4 Disassembly/Assembly > Controller System > Removing the Fixing Delivery/Paper Width Sensor PCB > Procedure
[B]
[B]
[3]
F-4-88
[1]
[1]
F-4-89
5) Free the harness [1] from the Harness Guide [A], and remove the Fixing Delivery/Paper
Width Sensor PCB [2].
• 1 Connector [3]
• 2 Claws [4]
[3] [4]
[2]
x2
NOTE:
The picture below shows how to route the harness.
4-48
[1] [A]
F-4-90
F-4-91
4-48