4
Disassembly/Assembly > Pickup Feed System > Removing the Pickup Unit > Procedure
Pickup Feed System
Layout Drawing
[3]
[4]
No.
Name
Main Unit
[1]
Pickup Unit
Pickup Unit
[2]
Pickup Solenoid
Pickup Unit
[3]
Pickup Roller
Pickup Unit
[4]
Separation Pad
Pickup Unit
4
Disassembly/Assembly > Pickup Feed System > Removing the Pickup Unit > Procedure
[2]
[1]
Reference
Adjastment during
parts replacement
(Refer to page 4-86) -
(Refer to page 4-91) -
(Refer to page 4-90) -
(Refer to page 4-93) -
Removing the Pickup Unit
■ Preparation
1) Remove the Separation Pad (Refer to page 4-93).
2) Remove the Left Cover (Refer to page 4-27).
3) Remove the ADF Unit (Refer to page 4-54).
4) Remove the Right Cover (Refer to page 4-28).
5) Remove the Front Cover Unit (Refer to page 4-29).
6) Remove the Upper Cover (Refer to page 4-30).
7) Remove the Rear Cover (Refer to page 4-29).
8) Remove the Speaker (Refer to page 4-51).
9) Remove the Main Controller PCB (Refer to page 4-39).
10) Remove the Communication PCB Unit (Refer to page 4-44).
■ Procedure
1) Remove the Main Controller PCB Installation Plate [1].
• 2 Screws (with plain washer) [2]
• 2 Screws (black TP) [3]
• 1 Hook [4]
x4
[4]
T-4-34
[1]
[3]
4-86
[2]
F-4-192
4-86