Canon L100 Service Manual page 146

4
Disassembly/Assembly > Pickup Feed System > Removing the Pickup Solenoid > Procedure
5) Free the Pickup Solenoid Harness [1] from the Harness Guide [A].
6) Remove the screw [1], move the Solenoid Arm [2], and then remove the Pickup Solenoid [3].
[1]
4 Disassembly/Assembly > Pickup Feed System > Removing the Pickup Solenoid > Procedure
[1] [A]
F-4-210
[2]
[3]
F-4-211
NOTE:
The picture below shows how to route the harness.
CAUTION:
Be sure that the terminal [1] is in contact with the Contact Spring [2] when installing.
4-92
F-4-212
[1]
[2]
F-4-213
4-92