Canon L100 Service Manual page 121

4
Disassembly/Assembly > Original Exposure System > Removing the ADF Upper Unit and ADF Lower Unit (L150 EUR/L150 AUS) > Procedure
5) Remove the 3 screws [1] of the ADF Upper Unit and ADF Lower Unit.
x3
4 Disassembly/Assembly > Original Exposure System > Removing the ADF Upper Unit and ADF Lower Unit (L150 EUR/L150 AUS) > Procedure
6) Remove the ADF Upper Unit and ADF Lower Unit [3] while freeing the harness [1] and Flat
Cable [2] of the ADF from the Harness Guide [A].
• 2 Hooks [4]
• 2 Bosses [5]
[1]
F-4-143
NOTE:
Be careful not to damage the Operation Panel Unit by placing paper where the ADF
Upper Unit and ADF Lower Unit are to be placed.
[1]
[2]
[A]
NOTE:
When replacing the ADF Upper Unit and ADF Lower Unit, execute steps 7 to 10.
4-67
[4]
[4]
[5]
[3]
F-4-144
4-67