Canon L100 Service Manual page 95

4
Disassembly/Assembly > Controller System > Removing the Engine Controller PCB > Procedure
<For L100/L170/L174/L250/L150 CHN/L150 KOR/L154 model>
2-1) Disconnect the terminal [1] of the Grounding Wire.
• 1 Screw (black TP) [2]
3-1) Remove the Ferrite Core [3], and free the Grounding Wire [1], 4 harnesses [4], and Flat
Cable [5] from the Harness Guide [A].
[A]
[5]
<For L150 EUR/L150 AUS model>
2-2) Disconnect the terminal [1] of the Grounding Wire.
• 1 Screw (black TP) [2]
3-2) Remove the Ferrite Core [3], and free the Grounding Wire [1], 3 harnesses [4], and Flat
Cable [5] from the Harness Guide [A].
[A]
[5]
4 Disassembly/Assembly > Controller System > Removing the Engine Controller PCB > Procedure
[3] [1] [2]
[4]
F-4-65
[3]
[1]
[2]
[4]
F-4-66
4) Remove the Main Controller Mounting Plate [1].
• 2 Screws (with plain washer) [2]
• 2 Screws (black TP) [3]
• 1 Hook [4]
[1]
x4
[4]
[3]
5) Disconnect the terminal [1], and free the Transfer High Voltage Harness [2] from the
Harness Guide [A].
6) Remove the Harness Retaining Spring [3] from the 2 hooks [B].
[A]
[2]
[1]
4-41
[2]
F-4-67
[B]
[3]
[B]
F-4-68
4-41