Canon L100 Service Manual page 138

4
Disassembly/Assembly > Fixing System > Removing the Fixing Assembly > Procedure
CAUTION:
• Be sure that the groove [1] of the hook is hooked to the edge of the Left Side Plate.
• Be sure to fit the 3 bosses [2] on the right and left.
[2]
4 Disassembly/Assembly > Fixing System > Removing the Fixing Assembly > Procedure
[1] [1]
[2]
F-4-187
CAUTION:
Be sure to wrap the Fixing Harness [1] around the protrusion [2] of the Harness Holder,
pass it through the Harness Guide [A], and then connect the connector [3] when
assembling.
[2] [1]
NOTE:
The picture below shows how to route the harness.
4-84
[A]
[3]
[1]
F-4-188
F-4-189
4-84