Canon L100 Service Manual page 125

4
Disassembly/Assembly > Original Exposure System > Removing the ADF Pickup Roller > Procedure
1) Release the locks of the ADF Upper Unit [1] and the ADF Lower Unit [2].
• 2 Claws [3]
NOTE:
Release the locks in this step to release the pressure applied on the ADF Pickup Roller
and the Slave Roller.
x2
[3]
2) Remove the gear [1].
• 1 Claw [2]
3) Remove the bushing [3] and E-ring [4].
4 Disassembly/Assembly > Original Exposure System > Removing the ADF Pickup Roller > Procedure
[2]
[3]
[1]
F-4-152
[4]
[2]
[3]
[1]
F-4-153
4) Move the bushing [1], and remove the ADF Pickup Roller [2].
[1]
CAUTION:
Be sure to fit the 2 protrusions of the bushing [1] on the right and left into the 2 cut-offs [A]
on the right and left when assembling.
[1]
[A]
4-71
[2]
F-4-154
[1]
F-4-155
4-71